How to fix iPhone no service problem? – 2022

One of the problems that iPhone owners may encounter from time to time is the iPhone no service error. The fact that the problem may be hardware or software makes users nervous. Because if it is caused by a hardware problem, you need to send your device to the service or have it repaired at another service point. So, how to fix the problem of no iPhone service? Let's take a closer look at this.

It is very useful to back up your device before proceeding with these operations to get rid of the no service error. You can backup to your iCloud account, i.e. directly to the internet or to your computer with iTunes.

iPhone no service error solution

1 – ) Close, open will fix. Yes, you didn't hear me wrong. Apple's first advice to users is to restart the device. If, as we mentioned above, you have encountered a software problem, turning the device off and on can make this problem disappear. Of course, there are very few survivors of the problem at this step. If the problem persists after the restart, let's proceed to the next steps;

2 – ) Unplug your SIM card and insert it again. In some cases, this solves users' problems.

If you continue to receive errors, the problem may also be caused by out-of-date operator settings. For this, it is necessary to do the following steps, respectively.

3 – ) Connect to a Wi-Fi network with iPhone. Go to About Settings > General >. Check that there is an operator update available here. If an update is available, it will appear. You must install this update.

If the above solutions for the iPhone no service problem did not work, you should follow the steps below in order.

4 – ) Check if your phone is up to date. Go to Settings > General > Software Update. Here will be information on whether there is an update. If there is an update, download it and install it.

– If there is no iOS update, go to "Operator" in About Settings >. Tap on this option 3 times. If you are not using the current version on the operator side, the update process will begin. Your carrier's settings will be updated automatically.

Alternative solutions for iPhone No Service repair

If you are still getting iPhone no service error, you can also try the following methods.

– Put iPhone in airplane mode and turn it off. And after you turn it off, dislodge the SIM card.

– Turn on iPhone without SIM card inserted. Turn off airplane mode and turn off the phone once again.

– When the iPhone is off, insert your SIM card and turn on the phone.

– After the phone is turned on, enter the Reset Settings > General > section and tap "Reset network settings". This will help reset iPhone's network connections.

By this stage, many users have been able to solve the problem. However, for users who still do not fix the problem, the method of completely resetting the device comes into play.

In the last step we will reinstion iOS on iPhone via iTunes. For this, you can follow the steps below. You can also click here to download iTunes software via Apple.

– Turn off iPhone after making iPhone backup.

– Connect iPhone with Lightning cable to current iTunes installed computer. Hold down the home button in the cable binding process. On iPhone X and later, press and release the volume up key twice. Finally, press the power button long. You will see iTunes link post on the screen.

– After this screen, iTunes will automatically review the model and show installation options on the computer. On the screen that appears, click "Restore".

– Click "Update and restore" which will appear later. The installation process for the model will begin. Do not remove the cable between the computer and iPhone until this process is complete, do not move it. A small disconnection can cause serious software damage to the iPhone.


0 Response to "How to fix iPhone no service problem? – 2022"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel